Franke – A1000 Refrigerator – SU12 CM
The housing parts, the door and the milk container with lid are made of easy-care plastic, the heatable cup surface is made of aluminium. The milk container is dishwasher-safe.
The cooling unit is adapted to the design of the coffee machine and must be installed on the left or right side and can be fixed at the coffee machine. The 12 liter milk container with carrying handle is connected via quick coupling system. The integrated FoamMaster module of the coffee machine ensures the foaming and heating up of the milk and also the optimum dosage of quantity of milk. The infinitely adjustable temperature control and temperature measurement directly in the medium ensure optimal milk temperature of + 3 ° C to + 8 ° C, which is displayed in the cooling unit and the touchscreen of the coffee machine.
Level monitoring of the milk by the milk pipe sensor of the coffee machine. By the lack of milk the products are locked. A message is displayed on the touchscreen of the coffee machine. A residual amounts purchase of milk or milk-coffee products after the empty message can be programmed with the connected coffee machine.
The door with replaceable profile-gasket is lockable with cylinder lock. Separate main switch and the temperature control located behind the device door.
Customers can adjust parameters as for example the milk temperature or the quantity of the milk via the touch screen of the coffee machine. The backup of the product settings is carried out on the internal memory or via the usb interface. The access can be individually defined and secured with PIN-code.
Product billing of the prepared products is possible via the connected coffee machine which can be connected to commercial billing systems such as a coin validator, coin changer or card reader via an MDB interface.
Integrated counters per product purchase and total product purchase.
Cleaning system CM CleanMaster
The integrated, automatic rinsing and cleaning program CleanMaster for the entire preparation area makes maintaining the device easier. The special system cleaning agents (DDAC- and BAC- free) are providing an optimum of hygiene as well as a consistent product quality.
For the visual operator guidance all manual cleaning steps are displayed on the touchscreen. The milk cleaner dosage is carried out automatically after start the cleaning program from the cleaner cartridge in the cooling unit integrated in the integrated tank in the cooling unit. The amount of water required is add dosed automatically by the connected coffee machine.
The cleaning solution is ready for use. The time required for cleaning reduced significantly. For the rinsing of the milk system and the coffee-outlet is the starting time programmable immediately after each product or for example 3 minutes after the last one. The milk system will be also rinsed inside the cooling unit. The output area is illuminated with LED-lights during the cleaning process.
For the use of two different types of milk, it is possible to order 2 milk containers with a capacity of 4,5 liters each. For example, whole milk and low-fat milk can be used for the preparation of coffee specialities. Lactose free milk as a second type of milk is not possible.
A red and a blue clip is used to identify the container. Separate monitoring of milk temperature and regulation of both types of milk.